Foro Club Ciclista Xixon 2000
Foro Club Ciclista Xixon 2000
Home | Perfil | Registrar | Temas Activos | Miembros | Bsqueda | Ayuda
Nombre:
Contrasea:
Recordar contrasea
Has olvidado tu contrasea?

 Todos los foros
 Actividades
 AO 2010
 Printing Machine Production Line
 Tema nuevo  Responder
Autor Tema anterior Tema Tema siguiente  

aqymibogewynojo
Nuevo miembro>Globero

China
13 mensajes

Publicado - 08/01/2020 :  16:27:28  Mostrar perfil  Visita la aqymibogewynojo's Homepage  Responder con cita
Product Name:Printing Machine Production Line
Product Description:
Characteristics:

● Control system: Delta PLC, productionorder can be saved and recalled to save changing time.Memorize system for easyoperation and maintenance.

● Double servo feeding system,each row of feeding wheels is driven by indepandent servo motor, high precision and low noise, non-feeding rollers in feeder to prevent the corrugated wave from damaging.

● Printing: Adopt famous brand anilox rolland rubber roll to ensure high-quality printing.

● Slotter: Computerized control the boxlength, width and box height, fast and convenient.

● Die cutter: Independent engine drivecontrolled by KEB servo system from Germany to ensure the die cutting accuracy.

● Surface speed compensation system. Diecylinder shifts when running to prolong the life of rubber anvil.

● Gears are made of high-quality chromesteel, heat treated and grinded to ensure the high stability and precision.

● Bearings and electrical components areall famous brand in Taiwan and in China.



Feeder













● Double servo feeding system,each row of feeding wheels is driven by indepandent servo motor, high precision and low noise, non-feeding rollers in feeder to prevent the corrugated wave from damaging.

● Dust removal device: the cleaning brush can clean the dust on surface of corrugated board to improve the printing quality.

● Side stop is motorized control. Flappingdevice to make the sheet pile in good shape.

● All the information can be showed andadjusted in the main touchscreen. The phase of each unit, box height can be setted in the main touchscreen.

● Memory system: Production orders can besaved and recalled to save changing time.

● Ink alarm system, the buzzer sounds whenthe printing unit be lack of ink.



Printing Section


● Memory system for easy operation andmaintenance. (This system can help to remember position of printing cylinderwhen operator stop the machine and open it to adjustment on printing plate. After finishingadjustment and close the machine sections, people can use this system to makeprinting cylinder return to the former position(before stop and open sections).

● 7.0 inch touchscreen on the printingunit,The printing register is computerized control. The printing cylinder ismotorized and computerized moved axially(±5mm).

● Mounting plate system to save thechanging plate time. foot switch is used to turn the printing cylinder whenmounting the printing plate.

● The anilox roll lift up and separatefrom the printing plate automatically when sheets are not feeded. And theanilox roll keep running when lifted up to prevent theink from drying.

● Self-locking and fast move of thefeeding wheels on printing unit.no need to fix the feeding wheels by screws.



Slotting Section


● Single shaft double knives slotter,7.0inch touchscreen on the slotter, box height, box length and width are all controlled by PLC and can be stored in the computer,saving the changing time in future.

● The up knife, lower knife, pre-creaserand creaser are synchronously moved. The precision liner slideway can ensurethe flexible and stable of moving.

● The up creaser wheel is covered byrubber anvil to protect the corrugated board from damage.

● Flexible corner cutting knife can cut3,5 and 7 layer corrugated board without adjustment. Easy to operate.

● The cutting knife is made of highquality alloy steel, knife thickness 7mm.

● Hand hole punching device is optional.








Die Cutting Section

● Independent engine drive controlled byKEB servo system from Germany to ensure the die cutting precision.

● Surface speed compensation system, thissystem can ensure rubber anvil cylinder running at the exact same speed with the die cylinder when the rubber anvilcylinder's diameter becomes smaller after long time using.

● Die cylinder shifts axially(±42mm)whenrunning so that the cutting knives cuts different position every time on therubber anvil,which can reduce the damage for therubber anvil.

● A turning tool on the die cutter canrepair the rubber anvil which is damaged after long time using.

● The die cutting phase is controlled byPLC (both in running and stop )and can be stored in the computer.

● Self-locking and fast move of feedingwheels, no need to fix it with screws.v
Price:10.00
Product Website:http://www.morotack.com
Company Description
Morotack (Tianjin) Technology Co.,ltd
Address:TianjinTianjinTianjinXiqing210# Zhijing Road Xiqing District Tianjin City China
Descption:Founded in 1985, MOROTACK has been manufacturing rotary joints - electrical and fluid rotary joints. We have been developing in this field for 35 years. In this field, we have a complete manufacturing process and management system, 45% of which have been Market share. The company began to intervene in packaging equipment in 2002. After decades of development, it has become the company's second main business. The company is known for its high-end customers in the international market and the domestic market, with excellent quality and excellent performance. Provide excellent products and services to leading companies in various industries around the world.
Registered Capital:100
EmployeeNum:100
Morotack (Tianjin) Technology Co.,ltd
Contact:Wei
Telphone:86-022-5790327-0
Fax:86-022-5790327-0
Email:morotack@aliyun.com
Company Website:http://www.morotack.com
  Tema anterior Tema Tema siguiente  
 Tema nuevo  Responder
Ir a:
Foro Club Ciclista Xixon 2000 © Admin Xixon 2000 Volver arriba
Esta pgina se carg en 0.05 seg. Powered By: Snitz Forums 2000 Version 3.4.06